Matrix Orbital Corp

Posted: **Tue Feb 04, 2003 6:18 pm**

OK.. please tell me if this setup will work at all

Thnx
Luke

Posted: **Tue Feb 04, 2003 9:02 pm**

I'm too colorblind to tell you if those bands are the right color but 100 ohms is right from the 3.2V @ 20 mA.

Is your LED red? 3.2V @ 20 mA seems high for red. (Probably OK anyway.) The other thing is you may as well just use a molex connector from your PSU, unless you have some sort of switch to power down your display.

Posted: **Tue Feb 04, 2003 9:06 pm**

the led is blue. so its ok to just have the resistor inline with the led. I don't have to have it on a board of any kind?. Again, I stress the fact that I am an idiot when it comes to electronics

Posted: **Wed Feb 05, 2003 9:47 pm**

Yep, no problem. I've got one hooked up just like that in my mouse.

Matrix Orbital Corp

LED and glk12232-25wbl