MX212 Faulty?
MX212 Faulty?
Hi, When i fire up lcdc, i get the error 'The LCD screen definition file has been tampered withor is not signed correctly. Cannot proceed.' Also, i have never had my mx2 working, even when the definition file was ok, all i get is a Matrix Orbital MX212 logo. When i try to audodetect, it says screen not found. Then when i try to send commands to it, it just displays wierd characters. Please help as this is the first lcd screen i have ever bought, and its turned into a nightmare. I'm thinking it could be faulty. The drivers are installed correctly. Please help =/
m00
[ http://angrycows.net ]
[ http://angrycows.net ]
Device Manager
My device manager shows: Matrix Orbital MX2xx USB Driver (COM3)
LCDC Won't pick it up, and any commands i send to the lcd just displays a random character for each command.
LCDC Won't pick it up, and any commands i send to the lcd just displays a random character for each command.
m00
[ http://angrycows.net ]
[ http://angrycows.net ]
done
I have a registered version of lcdc 1.05 Build 26. Tried uninstall and reinstall, still same. My version is 1.0 [thanks for your help]
m00
[ http://angrycows.net ]
[ http://angrycows.net ]
We are going to try and perform a manual override...
1) Unplug the USB cable from the LCD.
2) Remove the keypad connector.
3) With C1 being pin 1, you must put a jumper on pins 6 & 7 (you can use the HP jumper for now).
4) With the jumper still on, attach the USB cable to the LCD.
5) Remove the jumper and run LCDC.
(if you need further information you can refer to the manual)
Let me know how you make out...
1) Unplug the USB cable from the LCD.
2) Remove the keypad connector.
3) With C1 being pin 1, you must put a jumper on pins 6 & 7 (you can use the HP jumper for now).
4) With the jumper still on, attach the USB cable to the LCD.
5) Remove the jumper and run LCDC.
(if you need further information you can refer to the manual)
Let me know how you make out...
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital
Head of Technical Support
Product Manager
Matrix Orbital
No Manual
Hi, I did not receive a manual with my lcd... should i have? Going to try what you suggested now...
m00
[ http://angrycows.net ]
[ http://angrycows.net ]
W00T
w00t w00t! OMG... It works! Thankyou so much for your help, you have no idea how happy this makes me. =) You d' man! Thankyou Please =P
m00
[ http://angrycows.net ]
[ http://angrycows.net ]