New Software Support

Dan_Dude · Post by **Dan_Dude** » Mon Jun 23, 2003 3:35 pm

Hey, to those of you who don't know me I'm Dan, usualy hang around Pheaton or Hard Forums.

Anyway I publish a freeware program called VFD Thinger, and I just added full support for the entire line of Matrix Orbital VFD's to the latest version, and while it is untested, I see no reason why any of the MO 2x20/4x20 LCD's wouldn't work as well.

Check it out at www.vfdworld.com

Post by **Mat-Moo** » Mon Jun 23, 2003 4:03 pm

Dan, for some reason the MBM monitor stuff don't work on mine, with latest rev of MBM. Just says CPU: C Core: + etc. no numbers

and you might want to turn on "LineWrap" on the MO stuff otherwise it skips a line e.g. 1,3,2,4.

Dan_Dude · Post by **Dan_Dude** » Mon Jun 23, 2003 4:26 pm

mat-d-rat wrote:Dan, for some reason the MBM monitor stuff don't work on mine, with latest rev of MBM. Just says CPU: C Core: + etc. no numbers and you might want to turn on "LineWrap" on the MO stuff otherwise it skips a line e.g. 1,3,2,4.

Oh, sorry MBM isn't configured by default, since everyone has slightly different names assigned to their sensors.

If you go into the MBM config, by clicking the config button next to MBM, you'll be able to customise the strings as you want them, and insert the desired variables from MBM.

Also, because the software was written for 2 line displays, I had to fudge alittle for the 4 line models, line 1 items 3 and 4 will go on line 2, and line 2 items 3 and 4 will go on line 4.

Post by **Mat-Moo** » Tue Jun 24, 2003 1:34 am

Ah ok - my bad, just assumed that as the othe stuff all showed it would as well

... the 2/3 line thing was just for info no biggy, just thgouth I'd let you know.