No serial cable :\

[KAFK]Tiger · Post by **[KAFK]Tiger** » Thu Dec 19, 2002 8:37 am

Hey... Me and my buddy has bought a GLK-12232-25-WBL each, but somehow we didn't get any cables (and no, it wasen't GLK-12232-25-NC), a little disappointing, but we can make some ourselves. The only problem is that we can't find any schematics for the mounting points of the display... Could you help us with that??

[KAFK]Tiger · Post by **[KAFK]Tiger** » Thu Dec 19, 2002 9:25 am

We have found out what pins on the LCD we should use, but we don't know what pins on the COM-connector to use.. Could anyone help us with that?? There's gotta be someone out there with a similar LCD and a digicam who could take a highres picture of the back of the LCD and of the COM-connector...

Post by **Henry** » Thu Dec 19, 2002 9:50 am

Code: Select all

Pin Number   Direction       Description       LCD   Host 
   2         Data from LCD   Data out (LCD)    Tx     Rx 
   3         Data to LCD     Data in (LCD)     Rx     Tx 
   5                         Ground            gnd   gnd

[KAFK]Tiger · Post by **[KAFK]Tiger** » Thu Dec 19, 2002 9:58 am

BIG THX..... just what we needed...

Post by **Henry** » Thu Dec 19, 2002 9:59 am