Question's before I buy

americanfreak · Post by **americanfreak** » Mon Jul 15, 2002 8:21 am

Ok,
1)Do I have to have the 25 keypad to make the LCD's work or is all the functions controled from the software?
2)Can I assign keyboard combo's to make it do the different functions or is it done automaticlly after you setup the software.
3) Do I have to setup the LCD everytime I reboot? I heard, about a year ago, that you had to do this.

Post by **Henry** » Mon Jul 15, 2002 11:57 am

1. You configure the software to react to the keypresses.

2. Depends on the software you use.

3. Most LCD software will save your settings.

Software has come a long way since last year!

_________________
Henry J.
Technical Support
Matrix Orbital

<font size=-1>[ This Message was edited by: Henry on 2002-07-15 11:58 ]</font>

americanfreak · Post by **americanfreak** » Mon Jul 15, 2002 2:24 pm

I'm still alittle confused about question 1,Monday morning ya know :-)

Do I have to buy the optional keypad to make it work?

thanks

Post by **Henry** » Mon Jul 15, 2002 3:00 pm

On 2002-07-15 14:24, americanfreak wrote:
I'm still alittle confused about question 1,Monday morning ya know :-)

Do I have to buy the optional keypad to make it work?

thanks

Depends on what you buy... if you buy the BLK202A(or BVK202A) units, there is a keypad on the fron of the insert.

jacklord · Post by **jacklord** » Mon Jul 15, 2002 3:04 pm

You do not NEED a keypad, but they are helpful.

americanfreak · Post by **americanfreak** » Mon Jul 15, 2002 3:57 pm

Thanks jacklord. That's all I needed to know.