Where to get I2C/Pwr Connectors

AMahar · Post by **AMahar** » Wed Jul 10, 2002 9:56 am

I am asking about the 4 prong connector on the back of the LCD modules that supply +5v, I2C SDA/SCL, and ground. They are brown on the 0821 and LK204-25.

I think i found some connectors at mouser but I would like some recommendations on what connector model number and where to get them.

Anyway to get them at radio shack and avoid shipping wait times?

Thanks!
Tony

Post by **Henry** » Wed Jul 10, 2002 9:59 am

The female header can be found at Molex. Part Number : 22-01-2047-P; the inside pins are : 08-50-0114-C

AMahar · Post by **AMahar** » Wed Jul 10, 2002 10:11 am

It looks right from the specs, oddly enough all the dimensional drawings and images of the header show 6 pin...

Tony

Post by **Henry** » Wed Jul 10, 2002 10:17 am

On 2002-07-10 10:11, AMahar wrote:
It looks right from the specs, oddly enough all the dimensional drawings and images of the header show 6 pin...

Tony

They do that, but if you look at the bottom of the page (I think) there are specs for different pin arrangements.