Bezel and OK204-25

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
luis.taboada
LCD?
Posts: 4
Joined: Fri Oct 05, 2018 2:55 pm

Bezel and OK204-25

Post by luis.taboada »

Hi, It seems that the Bezel 4x20 won't fit the OK204-25, I follow the instructions but the 3/8'' screws won't pass thru, any help? thanks.

Image
Attachments
bezel.png
bezel.png (674.61 KiB) Viewed 9714 times

Daniel Divino
Matrix Orbital
Matrix Orbital
Posts: 247
Joined: Thu Sep 24, 2015 9:38 am

Re: Bezel and OK204-25

Post by Daniel Divino »

Hi Luis,

Welcome to the forums!

I understand you are having difficulties mounting your OK204-25 display on your 4 x 20 Bezel. Just to clarify the issue, do the 3/8" screws fit through the PCB mounting holes?

When test mounting the display, do all 4 screws align properly with the bezel?

Cheers,
Daniel
Daniel Divino
Technical Support
Matrix Orbital

Daniel Divino
Matrix Orbital
Matrix Orbital
Posts: 247
Joined: Thu Sep 24, 2015 9:38 am

Re: Bezel and OK204-25

Post by Daniel Divino »

Hi Luis,

After further investigation, we have confirmed the issues that you have experienced with the provided screws not fitting in the OLED's mounting holes. The issue is due to the OLED display's mounting holes being 2.5mm in diameter, which is too small for the recommend 5/8" screws.

At the moment, we will be removing the OK204-25 and it's -USB variant from the BEZ-204A-V1 compatibility list until we have a solution to the problem.

We would like to right our wrong in this case and compensate you for the troubles and the inconvenience this has caused you. I will PM you to discuss what compensation would work best for your current situation.

I apologize for the inconvenience.

Cheers,
Daniel
Daniel Divino
Technical Support
Matrix Orbital

luis.taboada
LCD?
Posts: 4
Joined: Fri Oct 05, 2018 2:55 pm

Re: Bezel and OK204-25

Post by luis.taboada »

Thanks for the reply, I made some changes to the bezel, it was already glued to the cabinet :(
But the final work has no problems.

Image
Attachments
20181011_223309.jpg
20181011_223309.jpg (4.54 MiB) Viewed 9311 times

Daniel Divino
Matrix Orbital
Matrix Orbital
Posts: 247
Joined: Thu Sep 24, 2015 9:38 am

Re: Bezel and OK204-25

Post by Daniel Divino »

Hi Luis,

I'm glad to see you were able to resolve the issue in the end.
The bezel looks really good from what I can see!

Cheers,
Daniel
Daniel Divino
Technical Support
Matrix Orbital

Post Reply