I encourage you to go to this URL: http://www.matrixorbital.ca/manuals/GTT ... 1.3%29.pdf
and search for "2.6" and also "Touch"
Not much information at all.
Manual Issues
Moderator: Mods
Re: Manual Issues
Thank you for your feedback; what kind of information would you like to see added to the Touch section of the GTT Protocol manual?
Troy
Troy
Troy Clark
Design & Development
Matrix Orbital
Design & Development
Matrix Orbital
-
- LCD?
- Posts: 4
- Joined: Sat Nov 05, 2011 4:30 pm
Re: Manual Issues
What I found odd was section 2.6 is really section 6.1
2.6 Should be Touch and it's Draw pixel.
e.g. 2.6 Draw Pixel
These are grouped together
--
2.6 Touch
6.1 Calibrate Touch Screen
--
That I find really, really ODD.
Which is why I said to look for both "touch" and "2.6"
2.6 Should be Touch and it's Draw pixel.
e.g. 2.6 Draw Pixel
These are grouped together
--
2.6 Touch
6.1 Calibrate Touch Screen
--
That I find really, really ODD.
Which is why I said to look for both "touch" and "2.6"
Re: Manual Issues
I see what you mean. The confusion comes from a desire to number both headings and commands while keeping the command names as short as possible.
Draw Pixel is technically section 2.2.6, while Calibrate Touch Screen would be 2.6.1.
I'll look at alternative solutions for the next manual revision.
Thanks again,
Troy
Draw Pixel is technically section 2.2.6, while Calibrate Touch Screen would be 2.6.1.
I'll look at alternative solutions for the next manual revision.
Thanks again,
Troy
Troy Clark
Design & Development
Matrix Orbital
Design & Development
Matrix Orbital