Poblems installing USB-drivers (VK202-25 USB)

Peter_Shaw · Post by **Peter_Shaw** » Fri Aug 14, 2009 10:46 am

Hello,

After installing another internal USB-device, I can't get my VFD working (VK202-25 USB). The problem occurs when I try to install the USB drivers: The first part of the installation is OK, but during the installation of the second driver the system seems to crash and the PC does a reboot. So it's not possible to install the second driver properly which means that I cannot control the display.
I tried the display installation on 2 different systems (both WIN XP) with the latest driver version (2.07).
I hope you can give me some advices.

Best regards,
Peter_Shaw

Post by **Ray** » Fri Aug 14, 2009 11:00 am

There's probably a mismatch in the driver versions, I have a copy of the latest ftdi drivers over here give those a whirl, I know the version number is lower then the ones on the website right now but we're transitioning to a new numbering scheme so its easier to tell what version of the ftdi drivers they are based on.

Peter_Shaw · Post by **Peter_Shaw** » Sun Aug 16, 2009 7:57 am

Sorry, that didn't work. The first part of the installation was fine, during the second part the system rebooted.

Peter_Shaw · Post by **Peter_Shaw** » Fri Aug 21, 2009 4:08 am

No ideas what's wrong?

Raquel · Post by **Raquel** » Fri Aug 21, 2009 9:27 am

Hello Peter,

I wonder if you please drop me an email at support@matrixorbital.ca, I would like more info on your display (eg. place and date of purchase).

Thanks,