I've just finished the circuit for connecting my quadrature encoder to the keypad input on the MO and it appears to work nicely. I do have one problem though. In order to get the input to work I have to set the debounce value to either 0 or 1. That's fine and works perfectly until the unit is power cycled when it stops working. When I reset the value to 0 or 1 it works correctly again so I assume it's forgetting the value for some reason. It says in the manual that it should remember this value, is this correct? If so what am I doing wrong? I'm using Display Tuner 0.7 to set the value.
