MBM5 doesn't support my nF3 250 mobo....what to do?

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
einsig
LCD?
Posts: 2
Joined: Fri Jan 07, 2005 1:26 pm

MBM5 doesn't support my nF3 250 mobo....what to do?

Post by einsig »

I'm about to buy a MX222. MBM5 doesn't support or work with my DFI nForce 3 250 mobo...at least at the moment. What are my options for GPU and CPU temp monitoring? Am I stuck with having to use probes or is there other software I can use?

If my only course of action is a probe, frankly I don't even know how or where to attach them for proper CPU or GPU readings.

Thanks in advance.

Tom
Matrix Orbital
Matrix Orbital
Posts: 1030
Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:

Post by Tom »

Hi einsig,

Thanks for posting at the Matrix Orbital forums.

An option you have is to use a hmonitor software located at http://www.hmonitor.com/ in the download section. This plugin should work with LCDC which will display the contents shown with hmonitor. The plugin for hmonitor that works with LCDC is also located in the downloads section.

This should be easier than using the temperature probes.

For more information on LCDC go to http://www.lcdc.cc/about.htm and http://forums.lcdc.cc/index.php?act=idx .

If you have any further questions or concerns, please feel free to contact me.

Best Regards, :D

einsig
LCD?
Posts: 2
Joined: Fri Jan 07, 2005 1:26 pm

Post by einsig »

Thank you for the quick reply and info! I'll give that a shot. Thanks.

soundx
LCD!
Posts: 19
Joined: Tue Apr 12, 2005 10:55 am

Post by soundx »

We've been doing some stuff with M BM5 over at DF-street.com
Yes, full support for your DFI NF3

Image

Full details and some stuff for Matrix Orbital MX421 here
http://www.dfi-street.com/forum/showthread.php?t=6798

works on DFI NF4 and NF3 with both XP 32-bit and x64 Edition.

enjoy, it's pretty kewl

course, still no x64 drivers for display (cough, cough, I know, it's being worked on :P )
Image

Mat-Moo
LCD Guru
Posts: 502
Joined: Wed Jan 16, 2002 4:00 pm
Contact:

Post by Mat-Moo »

You can try speedfan as well http://www.almico.com/speedfan.php
## # Mat # ##
LCDC - Drive it to the edge baby!
http://www.lcdc.cc
Matthew@DPS.uk.com
DPS Ltd. (Not MO!)

thodges33
LCD?
Posts: 6
Joined: Sat Apr 30, 2005 6:50 am

Post by thodges33 »

soundx wrote:We've been doing some stuff with M BM5 over at DF-street.com
Yes, full support for your DFI NF3

Image

Full details and some stuff for Matrix Orbital MX421 here
http://www.dfi-street.com/forum/showthread.php?t=6798

works on DFI NF4 and NF3 with both XP 32-bit and x64 Edition.

enjoy, it's pretty kewl

course, still no x64 drivers for display (cough, cough, I know, it's being worked on :P )
I had exactly the same problem as the thread starter, same mother board and MB5 didn't work... The post quoted above fixed everything, so thank you very much! Im glad i got mine showing temp and stuff now...

Post Reply