Hello
I'm new here and I have a big problem.
For an shoolproject I must send text to an LK202-24-USB display.
The programm must be written in C# (csharp).
In the technical manual stands an indication that is an possibility to use direct access to the USB display driver or access with a virtual COM Port.
Here my questions:
1. Is gives there a ready class in c# for simpel use the display?
2. Or can anyone help me how I can creat access to the modul and send the commands.
I'm pleased to each help I can get.
Thanks Roger
How I can get access to LK202-24-USB
Hi Roger,
Thank you for posting.
To send commands you must send the data shown in the manual to the com port.
Unfortunately, we do not have any sample code for c#, however I do have some same c code that may be useful to you. They are different languages, but the idea is the same. If you email me at tlam@matrixorbital.ca, I will send you a copy of the sample c code.
If you have anymore questions or concerns, please feel free to contact me.
Best Regards,
Thank you for posting.
To send commands you must send the data shown in the manual to the com port.
Unfortunately, we do not have any sample code for c#, however I do have some same c code that may be useful to you. They are different languages, but the idea is the same. If you email me at tlam@matrixorbital.ca, I will send you a copy of the sample c code.
If you have anymore questions or concerns, please feel free to contact me.
Best Regards,