using alternate temp probes with lcd

oublie · Post by **oublie** » Wed Jul 21, 2004 12:09 pm

hi i have a matrix mx 232 installed on my water cooled computer along with an aerogate 2 fan controller the aerogate comes with four 2 pin temperature probes and im also using an inline temp probe on my water cooling system to measure water temperature this also has 2 pins. can these be connected to the matrix ?

below is a link to a picture showing the temp probes

http://www.overclockersclub.com/imagevi ... /wires.jpg

Tom · Post by **Tom** » Wed Jul 21, 2004 1:09 pm

Unfortunately the temperature probe you have won't work with the MX2 series. The probe that is compatible with the MX2 series is the ds18s20. You can purchase one from us at the link posted below.

http://www.matrixorbital.com/pages/acce ... sp?CatID=2

Johnny · Post by **Johnny** » Thu Jul 22, 2004 8:52 am

Which town do you live in? fellow Norn Irishman! I have a few spare probes! sent you a PM