Is there a way to get the boot screen to be back lit like it is when in windows? It's off at power on then only turns on when I get into windows.
Thanks,
Devin
Boot up...
-
- LCD?
- Posts: 9
- Joined: Tue Jul 15, 2003 12:49 pm
- Location: Toronto, Canada
- Contact:
My Mx201 rev 1.1 stays lit through otu boot from the start, but my mx202 rev 1.3 does not, the backlight is only trigered once I enter windows... weird.
|| AMD 2400+ @ 2205Ghz FSB @ 400Mhz || Chaintech 7NJS nForce 2 || 512Mb Corsair XMS Pc3500 ||
|| ATI Radeon 9700Pro || 3DMark01 SE: 15,762 - 3DMark03: 4,966 ||
|| ATI Radeon 9700Pro || 3DMark01 SE: 15,762 - 3DMark03: 4,966 ||
Hi Miles,
I looked at the post and I'm having a little trouble understanding what to do. Could you elaborate on that a little more? I'm unsure what to solder or if I can just add a jumper to light up the display at boot? Also I couldn't see how I could get my splash/boot screen to show at power on.
Thanks,
Devin
I looked at the post and I'm having a little trouble understanding what to do. Could you elaborate on that a little more? I'm unsure what to solder or if I can just add a jumper to light up the display at boot? Also I couldn't see how I could get my splash/boot screen to show at power on.
Thanks,
Devin