Page 1 of 1

USB to SPI Development Kit for Matrix Orbital EVE Display Modules

Posted: Tue Nov 28, 2017 4:59 pm
by Henry
The USB to SPI Development Kit for Matrix Orbital EVE Display Modules Includes:

USB to SPI Bridge Module
Mini-B USB Cable (EXTMUSB3FT)
20pin Flat Flexible Cable (FFC-20P)
Four (4) Bumpons

The Matrix Orbital USB to SPI Bridge utilizes FTDI’s FT232H IC, allowing users to communicate to their SPI devices through a USB interface. Made specifically to be used with the Matrix Orbital EVE2 series of displays, the USB to SPI Bridge can help decrease development time and reduce development hardware complexity.

Product:
https://www.matrixorbital.com/product_i ... ts_id=2015

Video:
https://www.youtube.com/watch?v=AVeRa-dqO0I

Re: USB to SPI Development Kit for Matrix Orbital EVE Display Modules

Posted: Tue Feb 19, 2019 8:14 am
by Dominic
Hi,
We have just bought this module to use with display EVE2-35G. The goal was to get started quickly by trying it on the PC first then going to embedded. Is there some sample code available in c#? (There is not a lot of example on how to use this module)

Thanks
Dominic

Re: USB to SPI Development Kit for Matrix Orbital EVE Display Modules

Posted: Wed Feb 20, 2019 8:51 am
by Daniel Divino
Hi Dominic,

While we don't offer any code examples written in C#, we do have multiple examples written in C, and Arduino C. We also have a C library that you can use for your development.

These examples can be found on our website and our Github page:
Matrix Orbital Website: https://www.matrixorbital.com/app/app-eve-series
Github: https://github.com/MatrixOrbital

Cheers,
Daniel

Re: USB to SPI Development Kit for Matrix Orbital EVE Display Modules

Posted: Mon Feb 25, 2019 5:53 am
by Dominic
Hi Daniel,
Thanks for the answer. But I was referring to Visual Studio projects ( I found some in C but not in c#). Either way, I went directly to using embedded instead so I didn't even need this kit. (EVE2 is pretty easy even for embedded :) )

Thanks
Dominic