Page 1 of 1
Making a new autoexec file
Posted: Thu Jul 10, 2014 3:07 pm
by djvoss
After making a sequence of commands using the GTT Suport Tool then checking the result, How do I save this file to be used as the autoexec?? .bin doesnot seem to work. Thanks Don
Re: Making a new autoexec file
Posted: Thu Jul 10, 2014 3:19 pm
by Tino
Hi Don,
Thank you for posting your question to our forum.
To Create a Autoexec file:
-When you save the script file save it as a .bin file.
-Name the file 'AUTOEXEC" when saving it.
-Remove the file extension from your file. (.bin)
-Load the new file into SD Card.
I suggest you save the Old Autoexec to another location as a backup.
Thank you
Martino
Re: Making a new autoexec file
Posted: Thu Jul 10, 2014 3:26 pm
by djvoss
The KEY was to remove the .bin extension. Thanks
Re: Making a new autoexec file
Posted: Fri Jul 11, 2014 8:25 am
by Tino
Hi Don,
Thank you for posting on our forums.
If you have any other questions or concerns please feel free to ask.
Thank you
Martino