Page 1 of 1

GX Typhoon won't turn blue!

Posted: Thu May 10, 2012 4:51 pm
by White_Worm
So I've had my GX Typhoon for a while now and I just built a new PC. My old rig was red & black while my new one is blue & white. So I thought, "no problem, I can switch the colors on the GX because its a great product!".

Well I installed it on my new system with minimal hassle. Got LCD studio working and flashed the panel to the latest firmware. Problem is, now it won't turn blue (or white) and it doesn't fit with my system.

When I first installed it I used the GX Defaults program and used the backlight slider to make it 100% blue. Looked great. Then I updated to the latest firmware. Then it would flicker and stop displaying. I noticed that the LCD display was still on, just not with a backlight.

Can anyone help with this? The blue slider does nothing for the backlight at all so I can't make it fit with my system. I'd hate to have to throw it away because of that.

Posted: Fri May 11, 2012 5:01 pm
by Clark
Hi White Worm,

Could you please provide the serial number of that unit; it'll be on the back in black ink on a clear sticker in the form ##M##-####.

Thanks,
Troy

Posted: Sat May 12, 2012 11:47 am
by White_Worm
Clark wrote:Hi White Worm,

Could you please provide the serial number of that unit; it'll be on the back in black ink on a clear sticker in the form ##M##-####.

Thanks,
Troy
I can, but you'll have to give me a few days. Removing bay devices from this case is difficult. I'll post it here when I get a chance.

Thanks.