Basic Stamp Developers Guide...
Posted: Fri Dec 13, 2002 5:38 pm
BASIC Stamp Developers Guide...
We will be using the BS2 and BS2p Stamps... most of this demo software can be used on any of the Basic Stamps...
Basic Stamp 2
Basic Stamp 2p
The BASIC Stamp 2p-24 has several advantages over all previous BASIC Stamps. It is 3 times faster than a BS2 and 20% faster than the BS2-SX. Commands for interfacing with parallel LCDs, I2C devices and Dallas Semiconductor 1-Wire parts have been added along with a polled interrupt capability.
More information...
http://www.parallax.com/html_pages/prod ... stamps.asp
We will be using the BS2 and BS2p Stamps... most of this demo software can be used on any of the Basic Stamps...
Basic Stamp 2
- *Programmable in simple PBASIC Lanuguage
*16 I/O lines
*Program memory for ~500 instructions
*4000 instructions / sec. execution speed
*50K baud serial I/O
*24-pin DIP module
Basic Stamp 2p
- *Programmable in simple PBASIC Lanuguage
*16 I/O lines
*Program memory ~ 4000 instructions
*12,000 instructions/sec execution speed !
*Polled Interrupts
*38 Bytes RAM
*Operates near 40mA
*I2C and One-Wire Routines
*24-pin DIP module is pin-for-pin compatible with the BASIC Satmp 2, 2e, 2SX
The BASIC Stamp 2p-24 has several advantages over all previous BASIC Stamps. It is 3 times faster than a BS2 and 20% faster than the BS2-SX. Commands for interfacing with parallel LCDs, I2C devices and Dallas Semiconductor 1-Wire parts have been added along with a polled interrupt capability.
More information...
http://www.parallax.com/html_pages/prod ... stamps.asp