Voltage question......

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
PoGdiN
LCD?
Posts: 3
Joined: Sat Nov 12, 2011 4:30 am

Voltage question......

Post by PoGdiN »

Hi folks.

I got an old LK204-25 and am about to get it up and running again for a media center PC. The thing is i cant remember if its a 5v or 12v version.

Is there any way of telling just by looking at it?

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 3002
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry »

This should help

http://www.lcdforums.com/forums/viewtop ... ht=voltage

safe bet is to start with 5V and make sure you wire the power cable correctly, check the manual for the pinout.
Henry J.
President
Matrix Orbital

PoGdiN
LCD?
Posts: 3
Joined: Sat Nov 12, 2011 4:30 am

Post by PoGdiN »

Thanks for the help......

Started off with supplying 5v and just got the blocks.

Switched to 12v and its working fine :)

Post Reply