I've got an LK204-7T-1U and I would like to use the remaining 2 keys on the matrix grid (3-2/3-3). Before I tag a few lines onto the board, Is there a schematic or approved method for doing this?
Thanks in advance.
LK204-7T-1U Additional Keys
Hi,
While what you want to do is possible, it will void you warranty and as such is an action that we can not support as we can not be seen as condoning the modification of the hardware.
The 7T units has a 7 button keypad. If this isn't sufficient for your application, check out any of the -25 units as they all will support the addition of a 5x5 matrix key.
Brian Ingwersen
Engineering
Matrix Orbital
While what you want to do is possible, it will void you warranty and as such is an action that we can not support as we can not be seen as condoning the modification of the hardware.
The 7T units has a 7 button keypad. If this isn't sufficient for your application, check out any of the -25 units as they all will support the addition of a 5x5 matrix key.
Brian Ingwersen
Engineering
Matrix Orbital