Internal USB cable

[jameson_uk]

I have just received an internal USB cable and went to install it however I noticed that it is not the 5 pin connector it should be....

The LCD has the missing pin between D+ and GND but the connector has only four connectors...

Has the design of the cable changed at all or have the suppliers sent me the wrong cable ??

[invalidbuffalo]

One end of the cable should have a 5-pin connector that matches the header on the LCD. As far as I know MO still uses the keyed connector on all their displays, so you may have received one that was improperly made.

It should look something like this:
http://www.bigbruin.com/reviews05/matri ... file=6.jpg

[jameson_uk]

It does look just like that except that the solid connector block only has four sockets. There is no blanked out socket.

[Clare]

Hi Jameson_UK,

I am looking into this for you.

I will let you know once I receive confirmation.

Thanks,
Clare

[Clare]

Hi jameson_uk,

Did you order this cable off our website?

If so, can you please post your 4 digit e-commerce number or email me your full name that you used for your online account to :

cwagner@matrixorbital.ca

Thank you,
Clare

[jameson_uk]

Did you order this cable off our website?

No from one of distributors in the UK (KustomPCs)

[Adam]

Hi Jamison_UK

Does your cable look like the one on the web page located here http://www.matrixorbital.com/product_in ... munication

[jameson_uk]

Hi Jamison_UK

Does your cable look like the one on the web page located here http://www.matrixorbital.com/product_in ... munication

Sort of... except it has four individual header connectors on one and and a four socket connector block on the other.

Just realised, I can plug this in the other way around with the 4 block on the mobo and the indivual pins on the LCD....

[Clare]

Glad you sorted this out!

Clare