vfd mounting screws

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
lapoune
LCD?
Posts: 5
Joined: Sun Jan 08, 2006 7:36 pm

vfd mounting screws

Post by lapoune » Thu Mar 02, 2006 4:29 pm

Maybe I am trying the wrong way...but i seems that the screws that come with the vfd display I got are too short to be mounted on a keypad....is this normal and there is another set of screws for mounting on keypads or am I doing it the wrong way?

Tom
Matrix Orbital
Matrix Orbital
Posts: 1030
Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:

Post by Tom » Thu Mar 02, 2006 5:27 pm

Hi lapoune,

Thank you for posting on the forum.

If you are talking about screwing the display to the bay insert, then you would need to use 4-40 3/4" screws. If you ordered the display seperate from the mount, you would have gotten shorter screws. If you would like, email me at tlam@matrixorbital.ca , and I can mail you some screws. You should be able to pick some screws up at a hardware store really easily too.

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

lapoune
LCD?
Posts: 5
Joined: Sun Jan 08, 2006 7:36 pm

Post by lapoune » Thu Mar 02, 2006 5:54 pm

thanks for offering to send me new screws but I found some. I just wanted to know if I was installing the whole thing the right way

Thanks for the fast reply

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests