MOS-AL202C-BW3SC to Basic Stamp2
MOS-AL202C-BW3SC to Basic Stamp2
Can somebody tell me if i can connect the MOS-AL202C-BW3SC to a BS2 Micocontroler? Or do i recieve the documentation for that in the lcd package? Thanx
"The World Is Yours, Don't Sleep"
Hi eLusive,
Thank you for posting on the forum.
You can connect the MOS-AL202C-BW3SC to a BS2. You will need to change the communications on the display to TTL mode. Documentation on the unit can be found at http://www.matrixorbital.ca/manuals/MOS ... OS-AL202C/ there are some application notes for programming the BS2 for the display at http://www.matrixorbital.ca/appnotes/basic_stamp/
If you have anymore questions or concerns, please feel free to post them.
Best Regards,
Thank you for posting on the forum.
You can connect the MOS-AL202C-BW3SC to a BS2. You will need to change the communications on the display to TTL mode. Documentation on the unit can be found at http://www.matrixorbital.ca/manuals/MOS ... OS-AL202C/ there are some application notes for programming the BS2 for the display at http://www.matrixorbital.ca/appnotes/basic_stamp/
If you have anymore questions or concerns, please feel free to post them.
Best Regards,