MX212 WINDOWS XP PROBLEM

Narayan · Post by **Narayan** » Tue Jul 08, 2003 3:15 pm

all the drivers are from the fourm

Muzzlehatch · Post by **Muzzlehatch** » Thu Jul 10, 2003 11:56 pm

Naryan, I had your problem too and I fixed it by installing the latest LCDC (1.05.26) This version just came out and if you don't have it try getting it from http://www.lcdc.cc/downloads.htm. All my weird .dll problems went away when I installed this upgrade.

HTH!

Anarchi5t · Post by **Anarchi5t** » Sun Jul 13, 2003 10:26 am

Try This

http://www.lcdforums.com/forums/viewtopic.php?t=1270

Miles · Post by **Miles** » Mon Jul 14, 2003 3:03 pm

Narayan,

Did you get your problem resolved...?

DrBob147 · Post by **DrBob147** » Mon Jul 14, 2003 3:26 pm

All you guys having problems installing the drivers on WinXP...

You must totally remove the old drivers before you install the new V1.1...the only way that it worked for me was to go to "control panel"...click on "add/remove programs"...then search for MO Drivers and click Remove. It seems that windows does not like to totally remove stuff any other way. NOTE: when doing this, make sure that your display is disconnected...after removing the old drivers, plug the USD cable back in and when it says "new hardware found", have the Hardware Wizard point to the new drivers (V1.1) that you downloaded from the link above. This has worked perfectly for me and a few others that I know...Good luck!

Miles · Post by **Miles** » Mon Jul 14, 2003 3:38 pm

Thanks for the post DrBob...!!

MX212 WINDOWS XP PROBLEM

DLL problems with LCDC

Try This