Hey Firehorse,

are you using the newest drivers?

Or a different set?

Thank you for posting your solution.
Martino

Hi Firehorse Can I ask what PCB Revision your LK202-24-USB and your VK202-24-USB are? Also when you say "died" do you mean they are not powering up or you can not communicate to them? Lastly could you go into device manager and check what the VID & PID is for both units and let me know...

Not a problem.

If you run into anything else please don't hesitate to post.
Thank you
Tino

Hi NssOne, In LCD Studio when you set up the screen you would like to show when you are playing a game save it. Then set up a playlist or add this screen to a preexisting playlist. Then set the screen up to show when you are playing the game. If you have any other questions or concerns please feel f...

Hi Truby, Please refer to the I2C App Notes section here: http://www.matrixorbital.ca/appnotes/GTT20ArduinoI2C/ The App note uses Arduino but should give you an idea as to how the display works with I2C. If you could post a little bit of your code showing how you have your read function is setup I c...

Hi Truby,

Just to confirm, this is for your new GTT display correct?

We have an App note on I2C communication with the GTT that you can find here:
http://www.matrixorbital.ca/appnotes/GTT20ArduinoI2C/

What program are you using to communicate to your display?

Regards
Martino

Hi tvoglund There is some differences between the GLT and the GTT. The GTT uses Big Endian where as the GLT uses Little Endian. You are right you will need to convert your commands to Big Endian format. Please find below a link to some App notes for the GTT. It is in C# but should give you a good id...

Hi Ron,

Thank you for your post and bringing this bug to us.
I have tested this and can confirm that this is a bug with MOGD# 1.1.5.

We will fix this in the next revision.

Thank you
Martino

Hey Ric,

Not a problem!
Thank you for posting the solution you found on the forum!

If you run into any other issues please feel free to ask.
Thank you
Martino

Hi, I understand you are having an issue with your GTT43 resetting after you send a number of images to be displayed. To better understand and be able fully troubleshoot the issue is it possible that you send the images you are using in a zip file. Also any code or sequence of commands you are using...

Perfect!

Martino

Hi abrown,

Ok that's good.

Can you try running Mogd# as administrator and moving the Mogd# folder to your desktop. This could fix the issue.

Thanks
Martino

Hi abrown,

To better understand exactly what is going on with your GLK19264-7T-1U-USB I just have a couple questions.

Does Mogd# detect the display when you use the "Auto Detect Display" feature?

Can you write text to the display or draw to the display?

Thanks,
Martino

Hey Sid, Let's try this: Send the "Set and Save Data Lock" command setting the level to '0', Then set "Remember" to 'On', Send the "Set Baud Rate Command" setting the baud rate to the rate you would like. Then set "Remember" to 'Off" You can find the desc...

Hi Sid,

By only the hex file, what do you mean?

Is the hex file a .mem or .usf? What is the extension of the file if any.

If it is a .usf file you can open it within uProject's Uploader.

Thank you
Martino