Excellent ,

I would start with the getting started guide found on LCDC at http://www.lcdc.cc/help/index.htm This will make learning a little easier.

If you have anymore questions, please feel free to post them.

Best Regards,

So you were able to get the driver working?

The MX422 comes with a key with the sticker on your ecd. You then enter the the key in the website http://www.lcdc.cc/bundled/ Once you have all the information entered, lcdc will send you a registration code.

Best Regards,

What happens when you try another usb port?

Can you outline all the steps that you have done?

do you have any other conflicting drivers on your system? That can cause the driver to not install properly either.

I will take a look at the board, then I 'll get back to you about this.

Best Regards,

Hey CretanBull,

Were you able to get the display working when you installed it? Like any communications?

Hi lapoune, Thank you for posting on the forum. All displays are rated on their half life. The pled is around 10,000 hours per half life. The vfd and lcds are 100,000 hours per half life. What that means is at the specified time, the display will be half as bright. If you have anymore questions, ple...

You only need to install the x64 drivers. Are you taken to a option that says "continue anyways" for driver installation?

Hi lapoune,

Can you email me at support@matrixorbital.ca for rma options. Please state your first and last name, phone number, and order number.

I'm not 100% sure what you are talking about. Can you give me a visual example?

Jason, I was checking if the pic was still working. It is strange that you will have 2 dozen lock up like that. I suspect the culprit to be noise related. Have you tried communicating via I2C again after communicating via RS-232? How fast are you communicating with the display at on I2C? Have you al...

John,

How did you communicate it via RS-232? Can you try it with your pc, and the use the program called uproject, which can be downloaded at http://www.matrixorbital.ca/software/so ... /uproject/

Are you able to communicate with it via RS-232 after?

Hi Jason, Thank you for posting on the forum. I have seen this problem before. Once the display locks up, the power needs to cycled, and it will work again. This problem seems to be noise related. What I've seen that has worked is to connect your keypad to the ground plane. You can also place some r...