Hey Truby, Are you pressing the set region and somewhere else on the screen at the same time? Or are you pressing the set region first then after released pressing out of the region? I've set my GTT to the same setting you have mentioned. But I do not see the same result. When I press a set region o...

Hi fmcard, My apologies for the confusion. The information in the GLK19264A-7T-1U (2.0) manual is correct. You can find this here: http://www.matrixorbital.ca/manuals/GLK_Series/GLK19264A-7T-1U/GLK19264-7T-1U%20%28Rev2.0%29.pdf Thank you for bringing the inconsistency in the two manuals. I have forw...

Hi fmcard, Yes they are easy to see with the backlight off. I would recommend the -YG for viewing with the backlight off. Also the LK204-7T-1U Draws the least current. You find this information for both units in their manuals below: LK204-7T-1U: http://www.matrixorbital.ca/manuals/LK_Series/LK204-7T...

Hi fmcard,

Thank you for posting on our forums.

The EGLK19264A-7T-USB-YG-PL and EGLK19264A-7T-USB-FGW-PL are both transflective. As are the LK204-7T-USB-GW-PL and ELK204-7T-USB-YG-PL.

If you have any other questions or concerns please feel free to ask.
Thank you
Martino

Hey Jeff,

That's great! Glad to help.

If you have any other questions or concerns please do not hesitate to ask.
Thank you for posting.
Martino

Hi Jeff,

What PCB Rev are is your GLT240128?

Also could you check the firmware of your GLT240128 by sending the "Get Version Number" command (254 54) or selecting AutoDetect with Mogd#, the firmware number should be at least v8.3 in order for the Labels to work properly.

Thank you
Martino

Hey Truby, When setting the Font Size please make sure you set the Font first then set the size. If you do not set the font the size will not save to that font. In the GTT there is a separate buffer for 9-Slices, Bitmaps, Fonts and Animations. Each buffer has 256 slots. If you load a font into Index...

Hi Punky47,

The GX does work with Windows 8.1 32bit and 64bit.

You can find details here on how to set it up:
http://www.lcdforums.com/forums/viewtop ... 8fc#p25594

Thank you
Martino

Not a problem,

glad it's working now!

Thanks for posting on our forums.
If you have any other questions or concerns feel free to ask.
Thank you
Martino

Hi Lenny, It looks like by the output you are receiving the rows and columns are swapped. This could be caused from a couple of things: 1. Something as simple as the keypad being connected to the PCB backwards. or 2. You are using an older PCB Revision than 3.0. From PCB Rev 3.0 and up the Keypad In...

Hi NssOne, I apologize for the delay in my response. Unfortunately there isn't a plugin available at the moment for this. Plugins are typically made by users for LCD Studio.The plugin acts as a bridge between LCD Studio and whichever program you are pulling the data from. There is however informatio...

Hi, Depending on the PCB revision you have the you can find the manual of your display here: PCB Rev 2.0 http://www.matrixorbital.ca/manuals/GLK_Series/GLK19264A-7T-1U/GLK19264-7T-1U%20%28Rev2.0%29.pdf or PCB Rev 1.0 to 1.1 http://www.matrixorbital.ca/manuals/GLK_Series/GLK_GLC_Legacy/GLK19264-7T-1U...

Hey Zorrua,

If you upload a image that you would like to be in the start up upload it with the ID of '0'.
This will overwrite the image that is there now.

If you have any other questions or concerns please feel free to ask.
Regards
Martino

Hey Zorrua,

Unfortunately we do not have an example with LCDproc.

LCDproc does have a User Guide on their website here:
http://lcdproc.org/hardware.php3

User Guide:
http://lcdproc.sourceforge.net/docs/cur ... #glk-howto

Hope that helps,
Martino

Hi Zorrua, The GLK19264-7T-1U-USB can work with Linux. If you haven't installed the drivers for the display you will need to. Here is a link for an application note for using our displays with Linux: http://www.matrixorbital.ca/appnotes/Linux/Using%20Matrix%20Orbital%20Displays%20on%20Linux.pdf The ...