Search found 974 matches

by Tom
Tue Jul 27, 2004 10:15 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Buffer overflow or maximum turnaround time to receive char
Replies: 8
Views: 5143

The time it takes to handle one byte is quite variable depending on if it is a command or character, and what command it is. Characters should be fairly constant however, so you should be able to estimate the delay required between characters. In your code you use a for loop to create the delay. Dep...
by Tom
Tue Jul 27, 2004 10:14 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: VK204-24-USB stopped working tonight
Replies: 21
Views: 11487

Can you try to power it up without any devices hooked up to the GPO's and see if the display works?
by Tom
Mon Jul 26, 2004 12:27 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: dallas sensor reading
Replies: 2
Views: 2337

Unfortunately I haven't discovered how to do this, but if you go to the forum below you may be able to find an answer.

http://forums.lcdc.cc/
by Tom
Sun Jul 25, 2004 4:55 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Project thinktank
Replies: 19
Views: 16750

Very Impressive!!!
by Tom
Fri Jul 23, 2004 8:44 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Is the MX412 really intelligent?
Replies: 8
Views: 7273

Glad we can help! :D
by Tom
Fri Jul 23, 2004 8:41 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: adding more hard drive letters
Replies: 3
Views: 2452

Your Welcome!!!!...Ask more questions if you have anymore problems. :D
by Tom
Thu Jul 22, 2004 3:04 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: adding more hard drive letters
Replies: 3
Views: 2452

Hello...If you notice, when you place the string for displaying the drive the last letter of the string is the drive drive name.

ex) [#$SysDisNamC] - This string will display your C drive. You can just change the last letter you want to specify like m.

Hope this helps :D
by Tom
Thu Jul 22, 2004 9:28 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: the correct screen to get
Replies: 7
Views: 4918

Your welcome...You can create an event on LCDC to turn on your LEDs when you get emails. The link below will help you set it up. Also, If you are planning to use it with your PC you can purchase an MX series LCD screen that mounts into your PC bay, and you can purchase an LED board that can be mount...
by Tom
Thu Jul 22, 2004 8:56 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: the correct screen to get
Replies: 7
Views: 4918

Well all our products give you the ability of controlling led's or some sort of output via the low power GPO's (General Purpose Output). The model you're refering to shown on our website is the LK204-25. Use can check it out and purchase any of the products at the link below. http://www.matrixorbita...
by Tom
Wed Jul 21, 2004 10:11 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-25-WB Setup - Need Help Please
Replies: 4
Views: 3187

I'm glad to help. Let me know if you have anymore questions.
by Tom
Wed Jul 21, 2004 1:09 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: using alternate temp probes with lcd
Replies: 2
Views: 2330

Unfortunately the temperature probe you have won't work with the MX2 series. The probe that is compatible with the MX2 series is the ds18s20. You can purchase one from us at the link posted below.

http://www.matrixorbital.com/pages/acce ... sp?CatID=2
by Tom
Tue Jul 20, 2004 7:13 pm
Forum: General Chat
Topic: Keypad Inputs
Replies: 3
Views: 5218

Glad to help anytime. Let me know if you have anymore questions. :D
by Tom
Tue Jul 20, 2004 7:11 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Please help, corrupt display (MX224)
Replies: 10
Views: 5628

Glad to hear it works now. If you have any problems again let me know.
by Tom
Tue Jul 20, 2004 4:42 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Please help, corrupt display (MX224)
Replies: 10
Views: 5628

Can you try the following instructions? 1)Unpower your display 2)Place a jumper on pin 6 and 7 3)Power up your display again 4)The Baud will be set at a default 19200 Refer to the link, which is the manual, below. The instructions are on page 7 of the pdf file. http://www.matrixorbital.com/manuals/L...
by Tom
Tue Jul 20, 2004 4:30 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Please help, corrupt display (MX224)
Replies: 10
Views: 5628

There is a number on the backside of your LCD display. It's the side that shows all most of the electronic components. There is a Revision number shown on there. An example is Rev 1.4 . Can you please tell me what the revision number?