Hi Michael,

I have seen a couple instances where the display would freeze up because of a driver from another device. This wouldn't be seen in as a conflicting driver in device manager. What you can try to do is to removing your usb devices, and you can add them one by one as you test them.

Let ...

Hi gizmo1990,

I can definitely help you out with this matter. Please email me at tlam@matrixorbital.ca, and provide me with your full name, shipping address, and phone number.

Best Regards,

Hi eLusive,

Thank you for posting on the forum.

You can connect the MOS-AL202C-BW3SC to a BS2. You will need to change the communications on the display to TTL mode. Documentation on the unit can be found at http://www.matrixorbital.ca/manuals/MOS_series/MOS-AL202C/ there are some application ...

Ted,

The manual will be under PK202-24-USB, which is the display that is fitted inside the MX610. You can download the manual at http://www.matrixorbital.ca/manuals/PK_ ... 02-24-USB/

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

The LK202-24-USB-WB won't have a key included with it. You will need to purchase a registration key from lcdc at http://www.lcdc.cc/purchase.htm

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

G78,

What we noticed with the bigger fans is there has been more problems with the noise. What you can try is to adjust the frequency of the pwm with the program bootedit. You can also try placing a large capacitor value across power and ground to eliminate any high frequency noise. As for the ...

Hi gizmo1990,

Can you tell me which board revision you have for the VK202-24-USB?

The cd with the key should have come with your MX series display. Do you have a MX series display?

Hi Shawn,

Jon has responded to you via email.

Best Regards,

It is as easy as removing some screws with a phillips screw driver, and replacing the screen. The LK204-24-USB-R will be a perfect fit.

Best Regards,

Hi q_is_back,

The only way to change the display color is to actually change the display itself. You can get a LK204-24-USB-R.

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

Hi shawngibson,

Currently that set up won't work until the next release of the LK204-25. The LK204-25 will fit inside that mount, but the keypad won't connect properly. We have chaned it in the upcoming revision of the LK204-25. The display that will work for you will be the LK204-24-USB inside the ...

Hi Jan,

Try using uproject which can be downloaded at http://www.matrixorbital.ca/software/so ... /uproject/
You can set and save the default brightness of the display with that application.

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

Tim,

How old is the unit exactly? The unit may still be under warranty. Has long as it's under 1 year old.

Hi G78,

It looks asthough you will be over the limit on how many fans should go into a GPO. Each of those fans draw 12V 510mA. Each GPO can source a maximum of 12V 1000mA. If you try to draw more power than the maximum specificationsl, you can risk damaging the GPO. You can try either plugging only ...