We mailed you about our product but here we don't understand what are you trying to say?

Hi Daniel,

Thank you so much for your valuable reply.

I read the programming guide which was sent by you, in this Registers RAM_ERR_REPORT and REG_COPRO_PATCH_PTR are defined and suggested to use at the time of Coprocessor Faults. But that one is BT81X series' programming guide. But i am using ...

Hi Daniel,

Now everything fine and have planned to move from R&D to production .

But during our final full load test(24*7) , we are facing hanging issue in the "Ft_Gpu_Hal_WaitCmdfifo_empty" function.In that situation ,"REG_CMD_READ" register will not be equal to "REG_CMD_WRITE" register. So the ...

Hi Daniel,
I have fixed my issues. As of now the both displays are working well (Resistive & Capacitive). As you said, finally I have changed lcd timing clock and manual calibration thread. I am just coming to end up with application. Thank you so much for your support.

Hi Daniel,
Awesome. It's working well. Thank you so much for your support.

Hi Daniel,
Thanks for your reply. I uploaded new photo. Please go through my attachments. Yes, Daniel. I bought two types of display. I bought resistive and capacitive also. Currently I worked with your resistive display. But I have to improve touch accuracy. I will handle that issue. If I cannot ...

Hi Danile,
Now I am working with your capacitive touch screen display. I used your MO_Calibrate code. Because I don't have SD card option. I have modified few things in your MO_Calibrate code. But the touch functions are never working. Herewith I have attached my full project code also. Please let ...

Hi Daniel,
Thanks for your reply. Right now I am working with code. But meanwhile please can you send predefined Calibration data for both resistive and capacitive touch screen calibration data. I can move that data to calibration manually. Currently I am working with STM32F4 series controller. So ...

Hi sir,

This is Suresh from Chennai,India. Recently I bought two displays from your side (EVE2-38A-BLH-TPR & EVE2-38G-BLH-TPC ). As now I started with resistive type display. Basically its is working well. But I found the following issues.

1) When I have run calibration thread. I have found axis ...