Search found 13 matches

by delshay
Tue Sep 06, 2016 1:09 am
Forum: GTT Series
Topic: Faulty Display
Replies: 8
Views: 11101

Re: Faulty Display

Thanks, faulty display fixed/replaced all is well.
by delshay
Tue Jul 26, 2016 6:45 am
Forum: GTT Series
Topic: GTT Design Software 1.2.0.7732 Release
Replies: 3
Views: 9679

Re: GTT Design Software 1.2.0.7732 Release

awesome. ..looks fantastic, downloaded by going direct to website, above link does not work here.
by delshay
Tue Jul 19, 2016 4:54 am
Forum: General Chat
Topic: GTT38A PC Bay Installation (USB Version)
Replies: 1
Views: 9909

Re: GTT38A PC Bay Installation (USB Version)

I have one of my two display mounted in the 5.25 bay. Absolutely stunning perfect finish when viewed from the outside, but not so tidy finish when viewed from behind where it is mounted, but you can't see this once its in the drive PC bay. Not sure if I should list how it is mounted, as it requires ...
by delshay
Tue Jul 19, 2016 4:30 am
Forum: General Chat
Topic: any tips on unsoldering the tiny jumpers
Replies: 5
Views: 14351

Re: any tips on unsoldering the tiny jumpers

If you are unable to do this yourself, take device & print-out manual to an expert. Do not risk your hardware.
by delshay
Tue Jul 19, 2016 2:36 am
Forum: General Chat
Topic: GTT38A PC Bay Installation (USB Version)
Replies: 1
Views: 9909

GTT38A PC Bay Installation (USB Version)

This thread is for parts that maybe needed to install this display into a PC 5.25 bay. This type of cable don't seem to be that common. (Installation/modification at your own risk) *USB/Motherboard cable cheap. (back in stock 26/09/2016). http://www.ebay.co.uk/itm/5-Pin-Motherboard-Female-Header-to-...
by delshay
Mon Jul 11, 2016 8:59 pm
Forum: GTT Series
Topic: Faulty Display
Replies: 8
Views: 11101

Re: Faulty Display

I think I will return the unit. The only jumper that was moved is the one that power the unit, but I can move it back as USB power. PC here USB is always powered-up, even when PC is off, so display does not switch off when PC is off, when using USB power. I have full infrared vision base BGA solderi...
by delshay
Fri Jul 08, 2016 2:36 pm
Forum: GTT Series
Topic: Faulty Display
Replies: 8
Views: 11101

Re: Faulty Display

When unit is powered on ,there is no display but green power LED is lit. When a little pressure is applied to the smaller of the two BGA chip, it comes on every time & DEMO works while a little pressure is applied to the chip. When pressure is released, the next time it is powered up, display is...
by delshay
Fri Jul 08, 2016 12:09 am
Forum: GTT Series
Topic: Faulty Display
Replies: 8
Views: 11101

Re: Faulty Display

Hello Delshay, I understand that one of your displays is cutting out and going black whenever the screen is touched. It's unfortunate to hear that you've been having issues with one of your displays. Could you specify which display is having issues? If you could provide the model of display you are...
by delshay
Thu Jul 07, 2016 9:28 am
Forum: GTT Series
Topic: Predefined software setup
Replies: 3
Views: 7776

Re: Predefined software setup

I think I am going to need someone to write a Predefined software set-up for the GTT38A. I think something that is usable other than a demo will help sell more of this type of display for PC user(s). Most "PC" users just want to install hardware/software and not mess around with programmin...
by delshay
Thu Jul 07, 2016 8:19 am
Forum: GTT Series
Topic: Faulty Display
Replies: 8
Views: 11101

Faulty Display

I Bought two displays & one of the two has been faulty since I got it & is getting worse. I tried to find the HR fault on the PCB as it a pain to send it back. it was flakey when I got it and it still works (sometimes) , but this is touchscreen and will cut-out when screen is touched. Fault ...
by delshay
Sat Jun 04, 2016 4:30 am
Forum: GTT Series
Topic: Keypad Interface
Replies: 1
Views: 6445

Keypad Interface

GTT display keypad has a 12 pin interface, but the manual says KPP4X4 is compatible, but the KPP4X4 has 8 pin interface so how do you connect this keypad?
by delshay
Sat Jun 04, 2016 4:14 am
Forum: GTT Series
Topic: Predefined software setup
Replies: 3
Views: 7776

Re: Predefined software setup

I also think this would improve sales of this nice display if Predefined software was available. some user maybe put off from buying this including me as it looks a little complex to set-up. I have taken on the challenge to have a go setting this up, but would much prefer a basic set-up with install...
by delshay
Sat Jun 04, 2016 4:00 am
Forum: GTT Series
Topic: Predefined software setup
Replies: 3
Views: 7776

Predefined software setup

is it possible to have a few predefined software setup, so that all the end user has to do is drop this onto the SD Card? Like someone who posted in another thread. some user(s) may struggle to config this display. just basic stuff like what CPUZ,GPUZ would display and motherboard sensors. I just go...