My display is run via LCD Studio, which obviously is no longer supported... Are there alternatives people use?

Including all the utilities to control the bootup display/values etc?

I have created a signed version of LcdStudio 806 (same version as in the aug'08 rev1 software pack) just copy the exe file over the old copy (no installation required) and see if that makes defender happy. Please report back any success or failure

OK! Thanks! Will give it a go and let you know ...

I've had two different typhoons now, and with both of them the red led on the front seems to flash at times. This is in a small study where no remotes etc are being used.

It's rather distracting, so any chance of an option in a future firmware to turn off that led?

Ray wrote:I have created a signed version of LcdStudio 806 (same version as in the aug'08 rev1 software pack) just copy the exe file over the old copy (no installation required) and see if that makes defender happy. Please report back any success or failure

OK! Thanks! Will give it a go and let you know...

Most people I imagine mount the display in their case, with the case typically being to their left/right.

If the Typhoon was mounted such that the display was on a metal facure, mounted into bay fitting, but with a pin/hing on the left and/or right, it would mean you could angle the display.

To ...

Not quite sure what i can do about the defender situation, also have problems understanding what is happening when it does start, how have you configued lcdstudio to start? Full interface or minimized to traybar, if you have set it up to start from the traybar have you setup a default playlist ...

Windows Defender complains about it, so it cannot start. How do I allow it to automatically run.

Also, when I tell Windows Defender to run it (right click & allow), it displays my one and only page, but it does not run it. ie: Not of the figures/graphcs are updated. They're just static until I go ...

IR lights up whenver it sees an IR signal, could be anything from direct sunlight to a rouge remote somewhere in your home that emits IR whenver it feels like it. You can turn off the IR completly but not just the LED. I'll add that to the wishlist for future firmware upgrades.

It's sitting on a ...

Drivers should install on their own but that obviously failed here, can you manually install the drivers? Right click your GX in the device manager, click the proposed "install drivers" button and point it to C:\program files\Matrix orbital drivercore\drivers if it asks for drivers.

Seemingly all ...

Actually with your GX you should have gotten a letter with the correct location of the Drivers. If this wasn't included please let me know.

The latest drivers you can find here the current latest verison of the drivers are the Aug 2008 software pack for the GX

Ps. no need to cross post, its a ...

Actually with your GX you should have gotten a letter with the correct location of the Drivers. If this wasn't included please let me know.

The latest drivers you can find here the current latest verison of the drivers are the Aug 2008 software pack for the GX

Right! Still no joy :(

So this is ...

Actually with your GX you should have gotten a letter with the correct location of the Drivers. If this wasn't included please let me know.

The latest drivers you can find here the current latest verison of the drivers are the Aug 2008 software pack for the GX

Thanks!

So I should just download ...

OK, so trying to get a Typhoon to work on Vista 64.

Following the instructions as posted here - http://www.lcdforums.com/forums/viewtopic.php?t=3763
1 - Driver Core = Dead link! Great start!
2 - LCD Studio = Fine, installed it, but no good without (1) I assume.
3 - .Net 2.0 = I assume you do not ...

OK, so trying to get a Typhoon to work on Vista 64.

Following the instructions as posted here - http://www.lcdforums.com/forums/viewtopic.php?t=3763
1 - Driver Core = Dead link! Great start!
2 - LCD Studio = Fine, installed it, but no good without (1) I assume.
3 - .Net 2.0 = I assume you do not ...