Search found 211 matches

by Jon
Fri Jan 19, 2007 10:32 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: MX6 and Koolance Flow Meter
Replies: 2
Views: 4349

Hi Flyboy,

I think we would have to get one of these flow meters to be able to experiment with it.

Have you seen This flowmeter, it operates on the same pricipals as a fan, and can be monitored by LCDC as if it was monitoring fan speed.

--
Jon
by Jon
Wed Jan 17, 2007 5:58 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Medium/large digits problem
Replies: 16
Views: 18066

Hi alejandrocordova, sorry for not getting back to you sooner, the 2x2 characters would have to be implemented as custom characters. The problem is, you can only have 8 custom charactes, and when the manual was created, instead of actually writing the code that would show the various screens, they w...
by Jon
Wed Jan 17, 2007 5:11 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: I2C reads from display
Replies: 2
Views: 4245

Hi Sutton, I believe I have got to you about this question over the phone, however for the benifit of everybody else reading this, the display can only return keypresses in I2C. So the 00 that you have read, just means that there are no keypresses in the buffer. If you receive a byte, that means a k...
by Jon
Wed Jan 17, 2007 5:08 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: help please
Replies: 1
Views: 3240

Hi,

I also use drive rails, to mount the display in my case. All i have done is to place one screw into the drive rail. It's not perfect but it works.

--
Jon
by Jon
Mon Jan 08, 2007 1:39 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Characters appearing when they shouldn't
Replies: 2
Views: 4028

Hi Teaman, It is difficult for me to be certain, however it is possible that your electronics is generating garbage signals when it is initializing. If this is the case, the solution to this problem will be to "Set and Save Data Lock"** on the display before it is powered off, and then when it is po...
by Jon
Wed Dec 13, 2006 4:51 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: pk202 display lifespan
Replies: 2
Views: 4355

Please see this announcement.
by Jon
Wed Dec 13, 2006 3:02 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Help on mounting the VK202-24 USB
Replies: 4
Views: 5187

Hi Jason,

Intersting solution, hopefully it will hold.

So, they still have radio shacks there? In canada they have all been changed over to "the source, by circuit city", but frakly its exactly the same.

--
Jon
by Jon
Wed Dec 13, 2006 2:56 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: MX212 causes USB subsystem lockup on nForce4 board?
Replies: 30
Views: 28542

Pikaia,

Sounds like a good idea... Save your reciept for the USB PCI card in case it doesn't help.. just in case then u can just bring it back or exchange it or something (check the store policies...) :wink:

--
Jon
by Jon
Wed Dec 13, 2006 1:12 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: MX212 causes USB subsystem lockup on nForce4 board?
Replies: 30
Views: 28542

Hi lutorm, I would agree 110%. I have purchased 2 nforce motherboads in the last month. The first one, call it mobo1, the onboard network card stopped working pretty much out right, I delt with it, put in a PCI network card, and continued to use it. Then one day I go to turn on the mobo, and it does...
by Jon
Wed Dec 13, 2006 12:56 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: uProject error
Replies: 1
Views: 3632

Hi combatc2, The problem that you are noticing is the autodetect function giving you an error.... The autodetect does not work on uProject and to the best of my knowledge this software is not being supported by the author anymore. However, all you will need to do, in order to get past this screen, i...
by Jon
Tue Dec 12, 2006 5:13 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Request for a consolidated resource for software itself, by
Replies: 8
Views: 9226

Hi nombrandue, Ray (our friendly neighborhood software dude) informed me of another *nix program that you could play with. Apernetly it also doesn't suppor the keypad, but it has GPO/fan support. Here's the link: http://ssl.bulix.org/projects/lcd4linux/ As for the LCD to encorporate to the firewall ...
by Jon
Tue Dec 12, 2006 4:38 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Help on mounting the VK202-24 USB
Replies: 4
Views: 5187

Hi Jason,

Can you post some pictures of the inside of the case, and the maybe we can make suggestions?

--
Jon
by Jon
Tue Dec 12, 2006 1:40 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: pk202 display lifespan
Replies: 2
Views: 4355

Hi Jim, There is actually a great deal of uncertanty in the PLED (PK) market. At this point it actually seems as though we will no longer be able to sell PLED products. I hope that this will not be indefenite however for the immediate future we have to consider the product line discontinued until we...
by Jon
Tue Dec 12, 2006 11:20 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Help with connections
Replies: 5
Views: 5035

Hi Jason, The VK202-24 is designed to fit into the mountings off of our website here . However if you want to try to make the display work with a VL systems mounting you will have to mod their mounting in order to make it work. This might mean that you'll have to make a trip to your local hardware s...
by Jon
Tue Dec 12, 2006 11:01 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: GLK12232-25-WBL crash
Replies: 1
Views: 2916

Hi Perro Flaco,

Can you please send me an email at jklassen@matrixorbital.ca. I would like you to send this module in so that we may inspect it to see what caused it to crash.

Thank you.

--
Jon