... it's not done but you'll get the idea. It's my work log. Just scroll down though the page to see what was done. Enjoy.

http://www.gruntville.com/phpBB2/viewto ... &start=660

... in an effort to make their own buttons in an arrangement they see fit?

Very cool. I had read the manual a little and figured it out last night. I got the VFD running a bit ago. I tried running it on just the ext. USB and WinXP wasnt detecting it. I then did some searching here at the forums and found some useful info,... thats when I used the floppy "Y" conne...

Excuse my ignorance but i think it's suppose to be like that. Sorry for jumping to conclusions. The one thing I dont get though is what the manual says about about the GPOs. In the manual of VK204-24-USB under section 2.2.1 it says Advanced General Purpose Outputs & GPOs 1, 2, 3, and 4. Now, fro...

... pins has sheared off. I count 5 sets of 2 and one of the sets the pin is sheared off. Theres suppose to be 10 pins total right? Also,... I thought the were 6 GPOs?

Does anyone know if running 2 fans off of 1 fan header will effect the rpm reading of that header? I ran two 80mm's off of 1 header on an Areocool Gatewatch and the rpm reading was very erratic,... jumping all the way from 200 to about the normal rpm max. Will the MX series do the same? I wish they ...

Thanks. I had already called for the information I was looking for and had made my purchase too. I got the MX514, internal usb cable, and 4 dallas temp probes. I was told the the 514 was kinda green and bright so I went with it. I am going to be working with alot of uv green acrylic and I was thinki...

...sure I am making the right purchase. I am pretty sure I want the VFD instead of the LCD. The VFD characters are brighter and stand out more the the LCD displays. The LCD backgrounds stand out more the the charactersdo and I dont really like that. Anways,... from all the different MX models the on...

Oh,... ok. Well,... I will then need to some how rig a dallas probe to monitor the coolant temperature of my water cooling system. I was told to seal the tip of the probe with epoxy,... is this normal epoxy you could get from home depot of a special epoxy or something? Will seling the tip of the pro...

Anyone?

I am installing a water cooling system and the reservoir I am getting has a special probe that can be used to monitor the temp insed the reservoir. The probe screws right into the reservoir flawlessly. Its the fass-o-matci reservoir. I want to know if there is any way to get that probe to work with ...

For the MX2 you can connect 4 temp. probes and 6 on the MX4. The probe needs to be a dallas one wire probe. You would be able to use the probe in water aslong as you insulated with epoxy. Personally, I like a VFD better just because they are brighter, and they can withstand more extreme temperature...

Ok cool. How many temp probes can I connecy to the MX series? Does it have to be a dallas probe? I am setting up a water cooling system and want to monitor my water temps. Its going to require a different probe. Could I coonect that probe to the MX series? I took a look over the LCDC and read some a...

First,... I was browsing through the gallery and you guyz have some nice S#$%! Very nice. Ok,... I am building a machine and want a nice display in the front. I dont know the first thing about these matrix orbital displays. First question,... how do you get them to display stuff? Is it all through s...