Last summer Adam from MO sent me an attachment (b2021.gif) with the precise dimensions used for the aluminum faceplate viewing window on the MX series LCDs (I'm using the first rev. - both have the same size right??) I can't seem to reach him. I lost the file during a reformat of my HD. Does anyone ...

I'm using the latest LCDC - but I thought there was a way to change the bootscreen regardless of the software - through the unit itself. At least in terms of it being changed and stored in the firmware.

I just want to change what the unit displays when the entire computer is booted up.

Anyone?

I knew how to do this once but now I forget. I have a LK202-24-USB-WB from an older MX (pre fan controllers..).

How do you change what is displayed when the system is booting? Is there a way to change it back to the default?

I see. So while GPOs 1-3 give off 5V - with the 240ohm resistor that is there, the actual voltage is less. My red LEDs are 1.7V and 20 mA. When I usually hook up resistors for LEDs find one that drops the current so that the voltage is at or near the rated forward voltage. So for 1.7V I would probab...

I'm confused though. GPOs 1-3 have resistors but give out 5V? So if I put my 1.7V rated LEDs on GPOs 1-3, wouldnt it fry the LEDs? Wouldn't I need to limit the current to those leds with a resistor just as if I was getting power directly from a 5V line from a molex?

So just to make certain: 1. For the first 3 GPO, since they are giving 5V and I'm using 3.3 and 1.7V LEDs, I will need the proper resistors in line with my LEDs for those GPOs? 2. Same with GPOs 4-6? Once I make them 5V via the jumper. 3. Then what does it mean in the manual when it says GPOs 1-3 ha...

Hi. I have an older version of the MX2 (no direct fan or temp monitoring). I want to connect 4 leds to the GPOs (two blue - around 3.3V /two red - around 1.7 V). I know the first 3 GPOs are at 5V with current limiting resistors. But will I need to add a resistor with my LED when using the first 3 GP...

anyone have a good method/guide to Mounting LCD on our own FacePlates? I want to cut and mount my MX222 LCD on my own coolermaster aluminum faceplates. Cutting it shouldnt be too big a problem (tips welcome tho) - but its the mounting of the lcd that im not sure about. Glue bolts to back of the plat...

Now if there was only an aluminum bay with keypad . I'm leaning toward just play aluminum and foregoing the keypad for the sake of aesthetics. Plus, I don't see THAT much use for the pad. :/

Weee! Yay Henry!

Comes with connector so we can tailor it to our own mobos right?

They are 5 pin connectors (standard) right? So we just leave a space for whatever place the N/A or "not used" pin is right?

Hi everyone. Hope Henry or any other knowledgeable person can help me here. I want to make (rather have a shop make) a cable to connect the LK202-24-USB alternative usb header to my motherboards usb header. I'm not even sure how to discribe what I need to someone or what the cable would be called. I...