Matrix Orbital Corp

Posted: **Sat Nov 12, 2011 4:34 am**

Hi folks.

I got an old LK204-25 and am about to get it up and running again for a media center PC. The thing is i cant remember if its a 5v or 12v version.

Is there any way of telling just by looking at it?

Posted: **Sat Nov 12, 2011 1:15 pm**

This should help

http://www.lcdforums.com/forums/viewtop ... ht=voltage

safe bet is to start with 5V and make sure you wire the power cable correctly, check the manual for the pinout.

Posted: **Sat Nov 12, 2011 2:39 pm**

Thanks for the help......

Started off with supplying 5v and just got the blocks.

Switched to 12v and its working fine

Matrix Orbital Corp

Voltage question......

Voltage question......