Changing the Baud Rate With uProject
Posted: Fri Jul 07, 2006 10:12 am
1. Download uProject and the manual for your specific Display
2. Open uProject.exe
3. Select the Comport that the display is connected to.
4. Select the Baudrate that the display is using (Default 19200)
5. Click Open Com
6. Click the Main Tab at the top
7. Use the Brightness slider to see if the display is responding to commands.
---If the display does not respond ensure that the com port and baudrate settings are correct.
8. Click on the Remember Tab
9. Click on the remember Button
8. Click the Uploader Tab
9. Click on the '+' button
10. Click Raw Data
11. In the HEX number text box write FE (or 254 in the decimal box)
12. click add. '/254/' should appear in the raw data text box
13. Find the command to change the baud rate of your specific display in the user manual. If it is the new revision the command will be HEX number: 39 (decimal 57), so write that in the HEX number text box, and click add.
14. The Raw data text box should now say '/254//57/'
15. Find the HEX value that corrispons to the Baud Rate that you want to change your display to. For the newest revision alphanumeric display's the values are:
DEC - HEX - Baud
83 - 53 - 1200
41 - 29 - 2400
207 - CF - 4800
103 - 67 - 9600
51 - 33 - 19200
34 - 22 - 28800
25 - 19 - 38400
16 - 10 - 57600
16. If you want to change the display to 9600 baud add 67 in the HEX number box and click add.
17. Click OK
18. Right Click on the Command that you just added in the list and click execute line
You are done!
2. Open uProject.exe
3. Select the Comport that the display is connected to.
4. Select the Baudrate that the display is using (Default 19200)
5. Click Open Com
6. Click the Main Tab at the top
7. Use the Brightness slider to see if the display is responding to commands.
---If the display does not respond ensure that the com port and baudrate settings are correct.
8. Click on the Remember Tab
9. Click on the remember Button
8. Click the Uploader Tab
9. Click on the '+' button
10. Click Raw Data
11. In the HEX number text box write FE (or 254 in the decimal box)
12. click add. '/254/' should appear in the raw data text box
13. Find the command to change the baud rate of your specific display in the user manual. If it is the new revision the command will be HEX number: 39 (decimal 57), so write that in the HEX number text box, and click add.
14. The Raw data text box should now say '/254//57/'
15. Find the HEX value that corrispons to the Baud Rate that you want to change your display to. For the newest revision alphanumeric display's the values are:
DEC - HEX - Baud
83 - 53 - 1200
41 - 29 - 2400
207 - CF - 4800
103 - 67 - 9600
51 - 33 - 19200
34 - 22 - 28800
25 - 19 - 38400
16 - 10 - 57600
16. If you want to change the display to 9600 baud add 67 in the HEX number box and click add.
17. Click OK
18. Right Click on the Command that you just added in the list and click execute line
You are done!