Page 1 of 1
LK202-24-USB-WB BROKEN?!?!?!!
Posted: Thu Jul 14, 2005 12:02 pm
by fulostix
My LK202-24-USB-WB will not work anymore. It has been connected to the USB interface and was working fine. Then I turned on my computer one day and nothing happened. I attempted to use the floppy drive connector, but that didn't work either. Does anyone have any ideas?
Posted: Thu Jul 14, 2005 12:47 pm
by Tom
Hi fulostix,
Thank you for posting at the lcd forums.
Do you see the startup screen when you plugged in the floppy power cable?
Posted: Thu Jul 14, 2005 2:31 pm
by fulostix
No nothing came up at all. It's just blank...no power, lights, etc.
Posted: Thu Jul 14, 2005 2:34 pm
by Miles
With the A-B USB cable connected, what is the device listed as in the Device Manger under Ports (COM&LPT) and Universal Serial Bus controllers?
Posted: Thu Jul 14, 2005 8:31 pm
by fulostix
It is not listed at all. I tried a different USB cable, and different ports...the LCD will just not work. I'm wondering if it's broken
Posted: Fri Jul 15, 2005 8:58 am
by Tom
How long did you have the unit for?
Posted: Fri Jul 15, 2005 1:15 pm
by fulostix
I bough it on EBay about a month ago...might be out of luck.
Posted: Fri Jul 15, 2005 1:38 pm
by Tom
Can I get the serial number?