LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series
Moderators: Henry , Mods
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 03, 2002 12:31 pm
Hiyas Guys,
I am writing a program to show SETI stats on a MO LCD in Visual Basic. I was wondering whethre I could have some help.
I need some code that will easily send the text to the LCD. At the moment I am experimenting with the actual Mainframe of the program which reports the information about the SETI onto the VB program.
I am hoping to have it done soon
Shak
Ghoast
LCD Guru
Posts: 65 Joined: Thu Nov 29, 2001 4:00 pm
Location: Sweden
Contact:
Post
by Ghoast » Thu Jan 03, 2002 12:48 pm
Check my source code for LCDstats, it's all there. If you need help understanding it i'd be happy to explain.
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 03, 2002 12:56 pm
which modules are they in the source?
does it talk directly to MO LCDs or does it support others?
Shak
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Thu Jan 03, 2002 12:57 pm
LCDStats is MO only
it works with Alphanumeric displays. VFDs and LCDs. The command set if 99% the same between them. Only when you hit graphic does it change.
Henry J.
President
Matrix Orbital
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 03, 2002 1:15 pm
good good, looks like thats my base for the SETI LCD
Shak
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Wed Jan 09, 2002 4:11 pm
I have had no luck here... Since my computer crashed it will just not work... I keep getting Component MSCOMM32.OCX ir not registered...
Henry J.
President
Matrix Orbital
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Wed Jan 09, 2002 4:13 pm
OK, got that fixed.. now COMCTL32.OCX
Henry J.
President
Matrix Orbital
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Wed Jan 09, 2002 4:17 pm
ok, got that.. had to 1. find them... 2. register them manualy... there is comunication now... but it doesn't seem to be working.. if I try to turn the backlight on and off it just makes blocks... but it's a step closer...
(I feel like I'm talking to my self here)
Henry J.
President
Matrix Orbital
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 10, 2002 5:24 am
ok, damn damn damn damn....
gunna have to pick the code apart 2nite
Shak`
<font size=-1>[ This Message was edited by: Shak on 2002-01-10 05:24 ]</font>
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Thu Jan 10, 2002 9:24 am
It looks like it's talking, just seems the speed is off... hard code it for com 2 and 19.2K to begin with... what will give us one less thing to worry about.
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 10, 2002 10:20 am
ok d00d that will be done...
Shak
BasieP
LCD Smartie
Posts: 61 Joined: Mon Dec 03, 2001 4:00 pm
Location: Holland
Contact:
Post
by BasieP » Thu Jan 10, 2002 1:06 pm
i allready have it in my program:
LCD Smartie (but only version 5 will have MO support and that is not yet released
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Thu Jan 10, 2002 2:03 pm
your program displays SETI stuff
Shak
Shak
LCD Guru
Posts: 57 Joined: Tue Jan 01, 2002 4:00 pm
Location: Huddersfield, UK
Contact:
Post
by Shak » Fri Jan 11, 2002 5:11 am
SETI LCD beta one should work later...
it then (if it works) will be mailed around the world to all the dudes who want it...
Shak
Ghoast
LCD Guru
Posts: 65 Joined: Thu Nov 29, 2001 4:00 pm
Location: Sweden
Contact:
Post
by Ghoast » Fri Jan 11, 2002 6:10 am
Could you send it to me? I want to see it.