MAXIMUM PC AGAIN!!!!!111 W0000000000007!!!111
MAXIMUM PC AGAIN!!!!!111 W0000000000007!!!111
It's always so exciting to see our product in this great magazine... here is a scanned image, please go buy the magazine though!!!
large version 230k!!!
http://www.matrixorbital.com/forum_imgs ... imumpc.jpg
large version 230k!!!
http://www.matrixorbital.com/forum_imgs ... imumpc.jpg
Henry J.
President
Matrix Orbital
President
Matrix Orbital
-
- LCD!
- Posts: 12
- Joined: Sun Jun 23, 2002 6:00 pm
- Location: michigan!!!!
- Contact:
-
- LCD Geek
- Posts: 24
- Joined: Thu May 02, 2002 6:00 pm
- Contact:
omg it's huge
but just a few things
first of all the radiator should not be vertical
heat goes upwards, and now the lower part warms the higher parts.. not very efficient...
further the waterpump is all the way down the case, this means it should pomp lots of water upwards (against gravity) therefore you need a much more heavy pump
the power and reset buttens stick out a little bit. that realy sucks i can tell you, one bad move and you can reboot
and last but not least it's kinda sad the use only a XP2100 in it.. i have myself a 2400 in my workstation and to get a sample of a barton XP3000 won't be a problem since AMD is very genirous (orso) towards such projects
but just a few things
first of all the radiator should not be vertical
heat goes upwards, and now the lower part warms the higher parts.. not very efficient...
further the waterpump is all the way down the case, this means it should pomp lots of water upwards (against gravity) therefore you need a much more heavy pump
the power and reset buttens stick out a little bit. that realy sucks i can tell you, one bad move and you can reboot
and last but not least it's kinda sad the use only a XP2100 in it.. i have myself a 2400 in my workstation and to get a sample of a barton XP3000 won't be a problem since AMD is very genirous (orso) towards such projects
Heh. Never thought about that -I just got done building my WC setup and put the pump and radiator both at the bottom inside the case - the rad's fan is on the inside pulling in cool air through it and the pump's a 350gph, so I wasn't too worried about it pushing the water up .
But the temps are great and it's super-quiet compared to before. I've got my AthlonXP 2100 @ 2700 and had to up the voltage from 2.5 to 2.65 (or was it 1.5 to 1.65? - I dont remember) to keep it stable during games.
And I've been getting Maximum PC since when it was still called "Boot". I've got all but the first 1.5 years of the mag. It's the best there is.
Oh, and congrats, MO!
But the temps are great and it's super-quiet compared to before. I've got my AthlonXP 2100 @ 2700 and had to up the voltage from 2.5 to 2.65 (or was it 1.5 to 1.65? - I dont remember) to keep it stable during games.
And I've been getting Maximum PC since when it was still called "Boot". I've got all but the first 1.5 years of the mag. It's the best there is.
Oh, and congrats, MO!
-=:: Deus Ex Machina ::=-