LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series
Moderators: Henry , Mods
Dr_kazza
LCD Geek
Posts: 22 Joined: Mon Nov 12, 2001 4:00 pm
Post
by Dr_kazza » Thu Nov 15, 2001 7:13 am
Looking to get GPO output connectors and we can see CaseETC sell them but can only find one place in the UK that does them... unfortunately to crimp the wire you need a tool that costs 220 USD!!!
any idea what these things are called so that we can search a little easier? or if you know where they sell them in the uk that would be a lot better...
If not do you sell them so if I bought a load of stuff you could send me 4/order.. (only need three because if you chop them in half you have 2 ends therefore 8 GPOs
)
If you could sell them or point me in the right direction that would be great... ta
Ta
linear
evil Dr. linear
Posts: 288 Joined: Wed Aug 15, 2001 6:00 pm
Location: USA
Contact:
Post
by linear » Thu Nov 15, 2001 8:17 am
Hey kaz, I usually just salvage them off old cases (AT and such). If you come up totally empty, let me know, I'll lob a few your way.
Dr_kazza
LCD Geek
Posts: 22 Joined: Mon Nov 12, 2001 4:00 pm
Post
by Dr_kazza » Thu Nov 15, 2001 8:36 am
unfortunately I'm in the uk so unless I get really stuck I'm not going to get you to air-mail them ... thank you very much for the offer tho
<font size=-1>[ This Message was edited by: Dr_kazza on 2001-11-15 08:42 ]</font>
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Thu Nov 15, 2001 10:47 am
Well, I have to agree with linear, go rape and pillage some old cases
OR
get your self some female strip headers and heat shrink tubing. Thats what we generaly use here when we need some GPOs... I'll try to find some links for you.
Henry J.
President
Matrix Orbital
linear
evil Dr. linear
Posts: 288 Joined: Wed Aug 15, 2001 6:00 pm
Location: USA
Contact:
Post
by linear » Thu Nov 15, 2001 10:49 am
Dang Henry, if the forum admins can't set an example by not talkin' dirty....
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Thu Nov 15, 2001 10:54 am
LOL... you haven't seen anything yet...
Henry J.
President
Matrix Orbital
Dr_kazza
LCD Geek
Posts: 22 Joined: Mon Nov 12, 2001 4:00 pm
Post
by Dr_kazza » Fri Nov 16, 2001 1:10 am
found some eventually so I may order a few there...
Thx for looking for me henry
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Fri Nov 16, 2001 1:34 am
Post a link for future reference if it was a e-com site...
Henry J.
President
Matrix Orbital
Dr_kazza
LCD Geek
Posts: 22 Joined: Mon Nov 12, 2001 4:00 pm
Post
by Dr_kazza » Fri Nov 16, 2001 2:13 am
actually was one of your references... someone quoted it but I didn't read that it was from you...
GO TO BED it's bloody 1am!
(thx mate I appreciate all the help!)
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Fri Nov 16, 2001 9:32 am
On 2001-11-16 02:13, Dr_kazza wrote:
actually was one of your references... someone quoted it but I didn't read that it was from you...
GO TO BED it's bloody 1am!
(thx mate I appreciate all the help!)
WOW, it was 1:30am... what was I thinking
I think that macroman recomended that one to me... good to know!!!
Henry J.
President
Matrix Orbital
jodynicH
Case Guy
Posts: 82 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by jodynicH » Tue Nov 20, 2001 5:11 pm
I got a few of the caseetc ones, they have a small "hump" on the top but that doesnt matter, you can sand it off or leave it and take a minute risk
jodynicH
Case Guy
Posts: 82 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by jodynicH » Tue Nov 20, 2001 5:14 pm
heres a quick pic, the camera didnt focus, but you get the point.
Henry
OMNIPRESENT
Posts: 3002 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry » Tue Nov 20, 2001 5:23 pm
Good focusing, we got the other end perfectly
Henry J.
President
Matrix Orbital
jodynicH
Case Guy
Posts: 82 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by jodynicH » Tue Nov 20, 2001 5:24 pm
bite me