My keypad is set up in the following way:
C = Enter, D = Up arrow, E = Down arrow, I = F2, J = F1, K = left arrow, but there is no corresponding key for the Right arrow. I'm using the newest version of LCDC with a MX213. I'm wondering if anyone out there has seen this configuration or what?
Keypad Help!!
Keypad Help!!
I figured it out, the keypad was plugged into the wrong pins on the back of the LCD, shifting the plug one place to the right gave me the following settings
Up = K
Left = R
Down = L
Right = F
Enter = J
F2 = P
F1 = Q
Up = K
Left = R
Down = L
Right = F
Enter = J
F2 = P
F1 = Q