Check out my case in the pic below.
Do you have an LCD that will fit in my 2 3.5" places below my floppy? Thats the only space i have left. Would also appreciate to know what other stuff i need to get it to work, like serial cables etc..
Need help from Matrix Orbital!
I saw your posts on some UK boards
I would recomend using the MK2041 which is a mounting kit. Glue the two blank inserts together and then cut out a hole for the LCD.
This GLK12232-25 was mounted in 2 3.5 drive was by doing exacly what I said. Then you need a power and serial cable.
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-01-03 15:28 ]</font>
I would recomend using the MK2041 which is a mounting kit. Glue the two blank inserts together and then cut out a hole for the LCD.
This GLK12232-25 was mounted in 2 3.5 drive was by doing exacly what I said. Then you need a power and serial cable.
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-01-03 15:28 ]</font>
-
- LCD Guru
- Posts: 60
- Joined: Thu Aug 16, 2001 6:00 pm
- Contact:
-
- LCD Guru
- Posts: 60
- Joined: Thu Aug 16, 2001 6:00 pm
- Contact: