GLT240128 Interface options

Take a load off and chat!

Moderators: Henry, Mods

Post Reply
Absimpson
LCD?
Posts: 4
Joined: Mon Jul 14, 2014 4:20 pm

GLT240128 Interface options

Post by Absimpson »

I would like to use the serial pins on the GLT240128 to communicate to a gumstix processor. However, I want to solder the pins instead of using the normal connectors. Could I order the USB option (it looks like the connectors for the serial pins are still there but without the connector) and do this?

Thanks!

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital

Re: GLT240128 Interface options

Post by Tino »

Hi,

If you are looking to communicate with you display via the serial you will need to order a serial unit. We could look into a custom serial unit without the connections though.

Thank you
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

Post Reply