Page 1 of 1
uProject Problem
Posted: Thu Dec 06, 2012 12:06 pm
by flatdog747
I am having problems getting uProject to run. I am using Win 7/64. I have tried running as administrator.
- Capture.JPG (25.82 KiB) Viewed 16808 times
Any ideas?
Thank you.
Re: uProject Problem
Posted: Thu Dec 06, 2012 3:45 pm
by Clark
Hi Flatdog747,
Are you using a USB display or USB to serial converter? Does this error occur during autodetect?
Thanks,
Troy
Re: uProject Problem
Posted: Sat Dec 08, 2012 1:48 am
by flatdog747
Dear Troy,
I am using a VFD2041 with a serial to USB connector. This error occurs with or without the display plugged in.
Regards,
Philip
Re: uProject Problem
Posted: Sat Dec 08, 2012 5:26 am
by flatdog747
Problem solved - i didn't realise that I needed to install a driver for to serial to USB converter. All sorted now.
Re: uProject Problem
Posted: Mon Dec 10, 2012 8:40 am
by Clark
Good to hear Philip, thanks for the update.
With a USB to Serial converter, you'll notice that the autodetect does not function correctly. This is normal, uProject was created in a time when serial ports were commonplace and USB support minimal. The program will receive an update sometime in the future, but is still absolutely usable.
Troy