uProject Problem

Take a load off and chat!

Moderators: Henry, Mods

Post Reply
flatdog747
LCD?
Posts: 3
Joined: Thu Dec 06, 2012 12:00 pm

uProject Problem

Post by flatdog747 » Thu Dec 06, 2012 12:06 pm

I am having problems getting uProject to run. I am using Win 7/64. I have tried running as administrator.
Capture.JPG
Capture.JPG (25.82 KiB) Viewed 3309 times
Any ideas?

Thank you.

Clark
Matrix Orbital
Matrix Orbital
Posts: 864
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: uProject Problem

Post by Clark » Thu Dec 06, 2012 3:45 pm

Hi Flatdog747,

Are you using a USB display or USB to serial converter? Does this error occur during autodetect?

Thanks,
Troy
Troy Clark
Design & Development
Matrix Orbital

flatdog747
LCD?
Posts: 3
Joined: Thu Dec 06, 2012 12:00 pm

Re: uProject Problem

Post by flatdog747 » Sat Dec 08, 2012 1:48 am

Dear Troy,

I am using a VFD2041 with a serial to USB connector. This error occurs with or without the display plugged in.

Regards,

Philip

flatdog747
LCD?
Posts: 3
Joined: Thu Dec 06, 2012 12:00 pm

Re: uProject Problem

Post by flatdog747 » Sat Dec 08, 2012 5:26 am

Problem solved - i didn't realise that I needed to install a driver for to serial to USB converter. All sorted now.

Clark
Matrix Orbital
Matrix Orbital
Posts: 864
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: uProject Problem

Post by Clark » Mon Dec 10, 2012 8:40 am

Good to hear Philip, thanks for the update.

With a USB to Serial converter, you'll notice that the autodetect does not function correctly. This is normal, uProject was created in a time when serial ports were commonplace and USB support minimal. The program will receive an update sometime in the future, but is still absolutely usable.

Troy
Troy Clark
Design & Development
Matrix Orbital

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests