Matrix Orbital Corp

Please can someone tell me how to do the following with LCDC:

On keypad press show screen 1 for 5 seconds, show screen 2 for 5 seconds then revert back to the normal screen rotation (which does not include either of these screens).

I have tried everything I can think of. Logically I would think it would just be Keypad press - momentary screen Screen1 - Momentary screen2
but that doesn't work (screen 2 is never shown)

I have tried on keypad press momentary Screen1 - On event after Screen1 - momentary screen2..but this also doesn't work..again screen 2 is never shown.

Does it somehow override the 2nd screen display event with the default screen? (in my case the clock)

Please advise how I can do this!

Cheers,
PW

PS incase it makes a difference I want it normally displaying the time, and to show weather 1 then weather 2 only when the keypad is pressed.

Hello...

This post may get a better response if posted at http://www.lcdc.cc/forum.htm

Try making them into a group and then showing that group momentarily?

Something along those lines might work