Please help me before I go insane! =)

Take a load off and chat!

Moderators: Henry, Mods

Post Reply
PitchWhite
LCD?
Posts: 2
Joined: Fri Apr 02, 2004 5:03 pm

Please help me before I go insane! =)

Post by PitchWhite »

Please can someone tell me how to do the following with LCDC:

On keypad press show screen 1 for 5 seconds, show screen 2 for 5 seconds then revert back to the normal screen rotation (which does not include either of these screens).

I have tried everything I can think of. Logically I would think it would just be Keypad press - momentary screen Screen1 - Momentary screen2
but that doesn't work (screen 2 is never shown)

I have tried on keypad press momentary Screen1 - On event after Screen1 - momentary screen2..but this also doesn't work..again screen 2 is never shown.

Does it somehow override the 2nd screen display event with the default screen? (in my case the clock)

Please advise how I can do this!

Cheers,
PW

PS incase it makes a difference I want it normally displaying the time, and to show weather 1 then weather 2 only when the keypad is pressed.

Miles
Matrix Orbital
Matrix Orbital
Posts: 1105
Joined: Mon Mar 04, 2002 4:00 pm

Post by Miles »

Hello...

This post may get a better response if posted at http://www.lcdc.cc/forum.htm :D :D
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital

Pheonix
LCD Guru
Posts: 140
Joined: Tue Nov 27, 2001 4:00 pm
Contact:

Post by Pheonix »

Try making them into a group and then showing that group momentarily?

Something along those lines might work :)

Post Reply