Keypad Interface

GTT TFT Support

Moderator: Mods

Post Reply
delshay
LCD!
Posts: 13
Joined: Sat Jun 04, 2016 3:17 am

Keypad Interface

Post by delshay » Sat Jun 04, 2016 4:30 am

GTT display keypad has a 12 pin interface, but the manual says KPP4X4 is compatible, but the KPP4X4 has 8 pin interface so how do you connect this keypad?

Daniel Divino
Matrix Orbital
Matrix Orbital
Posts: 92
Joined: Thu Sep 24, 2015 9:38 am

Re: Keypad Interface

Post by Daniel Divino » Mon Jun 06, 2016 11:48 am

Hello Delshay,

Welcome to the forum!

I understand you are curious about how to interface our 4x4 keypad with the GTT.

Although the Keypad has 8 pins, while the GTT has 12 pins, they will still interface together properly. When connecting the keypad to the display, you will have to place the keypad connector on the middle pins of the keypad header; that is pins 3-10 labelled in the GTT Hardware manual.
[img]IMAG0186.jpg[/img]

Please give this a shot, and let me know if you are still having troubles.

Cheers,
Daniel
Attachments
IMAG0186.jpg
IMAG0186.jpg (3.78 MiB) Viewed 599 times
Daniel Divino
Technical Support
Matrix Orbital

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest