GTT 5 and 7 Rounded rect missing corners

GTT TFT Support

Moderator: Mods

Post Reply
grnbriar
LCD?
Posts: 7
Joined: Mon Oct 20, 2014 8:39 pm

GTT 5 and 7 Rounded rect missing corners

Post by grnbriar »

I have noticed on both of these displays, that if you use the rounded rect function on the right half of the screen the the two rightmost corners are missing, while those on the lef tside of the screen are fine.
Is this a known bug?

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: GTT 5 and 7 Rounded rect missing corners

Post by Clark »

Hi grnbriar,

I appreciate you bringing that issue to our attention. It has been solved and a fix will be included in the next firmware release.

Thanks again,
Troy
Troy Clark
Design & Development
Matrix Orbital

grnbriar
LCD?
Posts: 7
Joined: Mon Oct 20, 2014 8:39 pm

Re: GTT 5 and 7 Rounded rect missing corners

Post by grnbriar »

Is the firmware updateable when this fix is in a release?
Or will it be possible to find out when the next release is available before ordering my next samples?

Thanks

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: GTT 5 and 7 Rounded rect missing corners

Post by Clark »

Hi grnbriar,

Yes, all GTT firmware is field upgradeable. You'll simply replace the upgrade.bak file on your SD card with the most recent version from http://www.matrixorbital.ca/software/GTT2.0/GTTFirmware, and cycle power.

Thanks,
Troy
Troy Clark
Design & Development
Matrix Orbital

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: GTT 5 and 7 Rounded rect missing corners

Post by Clark »

Note: A fix for this issue has been released with firmware version R2.3.0.6632.

Download it here: http://www.matrixorbital.ca/software/GTT/Firmware/

Cheers,
Troy
Troy Clark
Design & Development
Matrix Orbital

Post Reply